ÂΜPG101 TABLETOP MICRO PATTERN GENERATOR,LASER WRITER

Transfer small pattern directly onto the substrate with the presence of UV light. The μPG 101 is an easy-to-use micro pattern generator for direct writing applications and also low volume mask making. The system can be used for applications like MEMS, BioMEMS, Integrated Optics, and Micro Fluidics.
Read More

3D NON CONTACT SURFACE PROFILER

It is 3-in-1 approach where each of the three techniques found in the system are confocal, interferometry and Ai Focus Variation. It has multiple measurement tools such as diameters, parallel distance, angles etc. 1. Confocal profilers - measure smooth to very rough surfaces. It provides the highest lateral resolution, up to 0.15 um line & space, with spatial sampling can be reduced to 0.01 μm, which is ideal for critical dimension measurements. 2. Ai Focus Variation - measure the shape of large, rough surfaces. 3. Interferometry - measure the surface height of very smooth to moderately rough surfaces, achieving same system noise at any magnification. For PSI, it can achieve system noise better than 0.01 nm.
Read More

SPIN COATER

A technique used to spread uniform thin films on flat substrates by centrifugal force. The apparatus used for spin coating is called a spin coater, or a spinner. A solution of material is dispensed onto the center of a wafer, which is then rotated at high speed.
Read More

PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITION (PECVD)

It is a chemical vapor depositon process used to deposit thin films from a gas state to a solid state on a substrate. It involves chemical reactions which occur after creation of plasma of the reacting gases.
Read More

X-RAY GENERATOR UNIT & 2D CMOS IMAGING SENSOR FOR MICRO CT SCAN

It is a real-time 2D x-ray inspection systems used to visualize internal points of interest without disassembling or damaging objects with inspection visual field approximately 1.7 mm to 35 mm. It is also available for computed tomography (CT) imaging with 60degrees tilt (panel detector). There is multiple image measurement for different samples such as dimension, ball grid area (BGA), area ratio and wire sweep ratio.
Read More

3D PRINTER DIMENSION SST 1200ES, ODESSEY X2 SERIES 3D

Use ABSplus that durable enough to perform virtually the same as production parts. Models printed with Dimension 3D Printers have customer-proven toughness- from commercial sprayers tested at pressures up to 60 psi. It supported with Soluble Support Techonology(SST). It can print 3D designs up to 10" x 10" x 12" (254 x 254 x 305 mm).
Read More

ÂΜEDM (HYBRID MICRO ELECTRICAL DISCHARGED MACHINE)

Micro-EDM is a process based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed methode to produce micro-parts which in the range of 50um-100um. It is capable of carrying out micro turning, micro milling, micro electro-discharge machining (EDM) and micro wire-cut EDM
Read More

PCB PLOTTER (PRINTED CIRCUIT BOARD PLOTTER)

The extensively equipped system that suitable for all application areas including multilayer and RF – in FR4 18/18 Cu material it can achieve PCB track widths up to 100 μm with high travel speed: max. 150 mm/s (6”/s). Available for milling/drilling for 1- & 2-sided PCBs
Read More

NUCLEAR MAGNETIC RESONANCE-400MHZ SPECTROMETER LIQUID STATE

It is a liquid state NMR method. It is a technique for characterizing molecular structure in solutions or liquid state materials in which the samples will be dissolved in deuterated solvents. It is capable to analyse a high sensitivity observation of Proton, Carbon, DEPT (45, 90, 135), Cosy, HMBC, HMQC and Phosphorus. It is also a valuable analytical tool for both quantitative and qualitative analysis.
Read More

NUCLEAR MAGNETIC RESONANCE-300MHZ SPECTROMETER LIQUID STATE

It is a liquid state NMR method. It is a technique for characterizing molecular structure in solution or liquid state materials in which the samples will be dissolved in deuterated solvents. It is capable to analyse a high sensitivity observation of Proton, Carbon, Dept (45, 90, 135), Cosy, HMBC, HMQC and Phosphorus. It is also a valuable analytical tool for both quantitative and qualitative analysis.
Read More

NUCLEAR MAGNETIC RESONANCE-400MHZ NMR SPECTROMETER SOLID STATE

It is a solid state NMR. It is a technique for characterizing molecular structure in solid materials such as powders, crystals and amorphous samples. It permits the high sensitivity observation of Aluminum, Boron, Carbon, Phosphorous, Silicone and Sodium nucleus. It is also a valuable analytical tool for both quantitative and qualitative analysis.
Read More

HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPE (HRTEM 200KV)

The facility is equipped with TEM which is often used to obtain detailed images of the internal structures of specimens

X-RAY PHOTOELECTRON SPECTROSCOPY (XPS)

The AXIS UltraDLD provides the latest generation tool for high sensitivity muti-technique electron spectroscopy. Spectra may be acquired in either scanned or rapid un scanned or rapid un-scanned scanned ‘snapshot snapshot’ mode by mode by using the delay-line detector (DLD). A quantitative analysis tool that can provide the elemental composition (excluding hydrogen) and information on chemical bonding environments and oxidation states within the upper 1-10 nm of the surface and reveal relative ratios or atoms of co-existing chemical states. XPS can offer: • Survey Spectra The number of electrons is plotted as a function of binding energy to produce survey spectra. These spectra show the elemental composition of the surface (excluding hydrogen and helium). • High Resolution Spectra The binding energy of a photoelectron reflects the bonding environment it was emitted from. Accurate measurement of peak positions after deconvolution of high resolution spectra provides quantitative chemical state information.
Read More

RAMAN LABRAM HR EVOLUTION (RAMAN)

Raman spectroscopy can provide key information about chemical composition and material structure. The Raman effect results from the interaction of laser light with molecular vibrations within the sample, and is highly sensitive to small changes in chemistry and molecular environment. Raman Labram HR Evolution laser wavelengths Wavelenght is 325nm and 633nm.
Read More

RAMAN XPLORA PLUS (RAMAN-AFM)

The platform integrates Atomic Force Microscopy (AFM), near-field optical techniques (SNOM, NSOM), Scanning Tunneling Microscopy (STM), tuning fork techniques and confocal optical spectroscopy (Raman and fluorescence imaging) in one versatile instrument, for fast simultaneous co-localized measurements and Tip-Enhanced Raman Spectroscopy (TERS). Raman Xplora Plus laser wavelengths is 532nm and 785nm.
Read More