TEMPERATURE-PROGRAMMED DESORPTION, OXIDATION, REDUCTION AND PULSE CHEMISORPTION ANALYZER

Performs pulse chemisorption, temperature-programmed reduction (TPR), desorption (TPD), oxidation (TPO), and reaction analyses. Determine catalytic properties such as percent of metal dispersion, active metal surface area, acid strength, surface acidity and distribution of strength of active sites.
Read More

HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH PHOTODIODE ARRAY AND FLUORESCENCE DETECTOR

Separates compounds dissolved in a liquid sample and allows qualitative and quantitative analysis of what components and how much of each component are contained in the sample.
Read More

ULTRA HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (UHPLC) WITH EVAPORATIVE LIGHT SCATTERING DETECTOR (ELSD)

Separate and measure a mixture of compounds using ELSD detector.

ADVANCED ELECTROCHEMISTRY SYSTEM

Measure electrochemical properties and material electro-activity for pesticides, drugs and organic contaminant compounds.
Read More

THERMOGRAVIMETRY ANALYZER INTERFACE WITH FTIR (TGA-IR)

Measures the amount and rate of weight change in a material, either as a function of increasing temperature, or isothermally as a function of time, in a controlled atmosphere. It can be used to characterize any material that exhibits a weight change and to detect phase changes due to decomposition, oxidation, or dehydration.
Read More

MDA-400M-O6, MIDAS SYSTEM MASK ALIGNER

Transfer small pattern from a photomask to the substrate with the presence of UV light. It holds the photomask over the silicon wafer while a bright light is shone through the mask and onto the photoresist, with process resolution 1 micrometer. It have 3 process mode ; soft, hard, vacuum & proximity contact.
Read More

ÂΜPG101 TABLETOP MICRO PATTERN GENERATOR,LASER WRITER

Transfer small pattern directly onto the substrate with the presence of UV light. The μPG 101 is an easy-to-use micro pattern generator for direct writing applications and also low volume mask making. The system can be used for applications like MEMS, BioMEMS, Integrated Optics, and Micro Fluidics.
Read More

3D NON CONTACT SURFACE PROFILER

It is 3-in-1 approach where each of the three techniques found in the system are confocal, interferometry and Ai Focus Variation. It has multiple measurement tools such as diameters, parallel distance, angles etc. 1. Confocal profilers - measure smooth to very rough surfaces. It provides the highest lateral resolution, up to 0.15 um line & space, with spatial sampling can be reduced to 0.01 μm, which is ideal for critical dimension measurements. 2. Ai Focus Variation - measure the shape of large, rough surfaces. 3. Interferometry - measure the surface height of very smooth to moderately rough surfaces, achieving same system noise at any magnification. For PSI, it can achieve system noise better than 0.01 nm.
Read More

SPIN COATER

A technique used to spread uniform thin films on flat substrates by centrifugal force. The apparatus used for spin coating is called a spin coater, or a spinner. A solution of material is dispensed onto the center of a wafer, which is then rotated at high speed.
Read More

PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITION (PECVD)

It is a chemical vapor depositon process used to deposit thin films from a gas state to a solid state on a substrate. It involves chemical reactions which occur after creation of plasma of the reacting gases.
Read More

X-RAY GENERATOR UNIT & 2D CMOS IMAGING SENSOR FOR MICRO CT SCAN

It is a real-time 2D x-ray inspection systems used to visualize internal points of interest without disassembling or damaging objects with inspection visual field approximately 1.7 mm to 35 mm. It is also available for computed tomography (CT) imaging with 60degrees tilt (panel detector). There is multiple image measurement for different samples such as dimension, ball grid area (BGA), area ratio and wire sweep ratio.
Read More

3D PRINTER DIMENSION SST 1200ES, ODESSEY X2 SERIES 3D

Use ABSplus that durable enough to perform virtually the same as production parts. Models printed with Dimension 3D Printers have customer-proven toughness- from commercial sprayers tested at pressures up to 60 psi. It supported with Soluble Support Techonology(SST). It can print 3D designs up to 10" x 10" x 12" (254 x 254 x 305 mm).
Read More

ÂΜEDM (HYBRID MICRO ELECTRICAL DISCHARGED MACHINE)

Micro-EDM is a process based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed methode to produce micro-parts which in the range of 50um-100um. It is capable of carrying out micro turning, micro milling, micro electro-discharge machining (EDM) and micro wire-cut EDM
Read More

PCB PLOTTER (PRINTED CIRCUIT BOARD PLOTTER)

The extensively equipped system that suitable for all application areas including multilayer and RF – in FR4 18/18 Cu material it can achieve PCB track widths up to 100 μm with high travel speed: max. 150 mm/s (6”/s). Available for milling/drilling for 1- & 2-sided PCBs
Read More

NUCLEAR MAGNETIC RESONANCE-400MHZ SPECTROMETER LIQUID STATE

It is a liquid state NMR method. It is a technique for characterizing molecular structure in solutions or liquid state materials in which the samples will be dissolved in deuterated solvents. It is capable to analyse a high sensitivity observation of Proton, Carbon, DEPT (45, 90, 135), Cosy, HMBC, HMQC and Phosphorus. It is also a valuable analytical tool for both quantitative and qualitative analysis.
Read More